CA Cycleworks Products - Exact Start Hi Cap Cable Kits - QR Fuel Connectors - Motool Digital Suspension Tool
Scroll down to see a list of all our current kits
& a fitment video at the bottom of the page...
QR-01 Ducati & MV Agusta
Ducati 748* - note, a small amount of 748's were manufactured without quick release connectors or with non-tapered threads, and therefore this kit will not fit a small minority of 748 Ducati's (we believe it was a few 748E models). Please check prior to ordering.
Ducati 916 - all model variants
Ducati 996 - all model variants
Ducati 998 - all model variants
MV Agusta F4 - all models: 750 / 1000 / 1078
MV Agusta Brutale - all models: 675 / 750 / 800 / 910 / 990 / 1078 / 1090
Ducati Panigale 899 - all models variants
Ducati Panigale 959 - all models variants
Ducati Panigale 1199 - all model variants
Ducati Panigale 1299 - all model variants
Ducati Superleggera 1199 & 1299
*Note: all models means all models with CPC Type Plastic Male & Female fuel connectors as standard fitment.
Triumph Speed Triple 885i (1994 to 2006) - all model variants
Triumph Speed Triple 955i (1994 to 2006) - all model variants
Triumph Speed Triple 1050 (2005 to 2021) - all models variants
Triumph Speed Four (2002 to 2005) - all model variants
Triumph Sprint RS & ST (2005 onwards) - not 1999 to 2004 955i - see kit QR-13
Triumph Tiger 885i (1993 to 1999) - all model variants
Triumph Tiger 955i (2001 to 2007) - all model variants
Triumph TT600 (2000 to 2003) - all model variants
Triumph Daytona 595 (1997 to 2006) ***see note in red below
Triumph Daytona 600 (2002 to 2005) ***see note in red below
Triumph Daytona 650 (2002 to 2005) ***see note in red below
Triumph Daytona 955i (1997 to 2006) ***see note in red below
NOTE: Some Daytona's use 2 x 1/4" 90 degree fuel hose connectors and not the more common set up of one 1/4" (6mm) and one 3/8" (10mm) which this kit comprises. (see further note below)
Edit: We have also come across a Daytona's using 2 x 3/8" (10mm ID Hose connector)
Edit: Some Daytona’s also use 1 x 3/8" (10mm ID Hose connector) and 1 x 5/16" (8mm ID Hose connector).
Edit: and some have been found using 2 x 5/16” (8mm ID Hose Connectors)
The outer diameter of the barbs on our connectors measure:
1/4" = 7.6mm (for 6mm / 1/4" Internal Diameter Hose)
5/16" = 9.3mm (for 8mm / 5/16th Internal Diameter Hose)
3.8" = 10.6mm (for 10mm / 3/8" Internal Diameter Hose)
Fits all liquid cooled 2013 onwards BMW R1200 series bikes & S1000's
BMW R1200 GSW (for R1200GS see our QR-06 & QR-11 Kit depending on year/connector type)
BMW R1200 GSW Adventure
BMW R1200 RTW
BMW R1200 RW
BMW R1200 RSW
BMW S1000 R
BMW S1000 RR
BMW S1000 XR
BMW K1200 - all model variants
BMW K1300 S - all model variants
BMW K1300 R - all model variants
BMW K1300 GT (2006 on)
BMW K1600 GT - all model variants
BMW K1600 GTL - all model variants
BMW R nineT - All
BMW R1200 ST - All
BMW R1200 GS - 2008 Onwards (Check Your Fittings are the Same Layout)
For 04 to 07 R1200 GS see QR-11 Kit
BMW R1200GS Adventure - All years including ABS Models.
BMW R1200R Adventure - All years.
BMW R1150GS ADVENTURE - All years including ABS models.
BMW R1100 GS
BMW R1100 R
BMW R1100 RS
BMW R1100 RSL
BMW R1100 RT
BMW R1100 RT-P
BMW R1100 TL
BMW R1100 S
BMW R1100 SA
BMW R1150 GS
BMW R1150 R
BMW R1150 RS
BMW R1150 RT
BMW R1150 RT-P
BMW R1200 C
BMW R1200 CL
BMW K1200 LT
BMW K1200 RS
Note: does not fit the 1150 GS Adventure - please see our other listing: Part Number QR-08
BMW HP2 Sport
BMW R1200GS (2004 to 2007) Check your connector types.
For later R1200GS see our QR-06 Kit:
Note: does not fit the R1200GS from 2008 onwards or the R1200M, R1200GS Adv, R1200ST or R1200R - please see our other kits.
BMW HP2 Enduro
BMW HP2 Megamoto
Triumph Sprint 955i - All
For other Triumph Models see our other kit QR-03.
QR-14 KTM & Aprilia
Fits all twin cylinder fuel injected KTM bikes: examples...
950 SM Supermoto
950 Super Enduro
Fits Aprilia following models:
Aprilia Falco R 2003
Aprilia RS250 from 1996 - 2004
Aprilia RSV Mille / Mille R from 1998 - 2004
Aprilia Tuono 1000 from 2002 to 2005
QR-14 Various Applications
All applications that use a 5/16" (8mm) Internal Diameter Fuel Hose.
Barbs are 9.2mm diameter.
KTM - All 'Non Fuel Injected' Models
All other applications that use a 1/4" (6mm) Internal Diameter Fuel Hose.
Barbs are 7.6mm diameter for 1/4" (6mm) Internal Diameter.
QR-15 Various Applications
All applications that use a 1/4" (6mm) Internal Diameter Fuel Hose.
Barbs are 7.6mm diameter.
QR-16 Various Applications
All applications that use a 3/8" (10mm) Internal Diameter Fuel Hose.
Barbs are 10.7mm diameter.
All KTM 350 (Fuel Injected)
All KTM 450 (Fuel Injected)
All KTM 500 (Fuel Injected)
2001 to 2007 Aprilia Caponord ETV1000 Motorcycles including ABS models
Here's a Video from RRW's YouTube Channel in Canada which shows the fitment of some threaded and non threaded Quick Release fuel connectors...
© Copyright. All rights reserved.